MINN KOTA Talon Mode D'emploi page 2

Forgetting a Talon on a Device
Once a device is paired to a Talon, it will remember the device, even if the device and the Talon are not actively communicating. In
some cases, it may be necessary to clear the memory on the device and forget any paired Talons. To do this, use the Bluetooth settings
on the device.
1
a. Open the Bluetooth settings on the device.
b. A list of paired devices will appear. The appearance
of the list from an Android to an iOS device will look
different.
c. On an Android device, select the Settings
next to the device in the list of Paired Devices. When
the next screen appears, fi nd the option to Unpair
the device and select it.
d. On an iOS device, select the "i"
the device in the list of My Devices. When the next
Screen appears, fi nd the option to Forget this Device
and select it.
e. Once the device is unpaired or forgotten, the device
is no longer paired or communicating with the device
and will not be visible to the Talon App or device.
Clearing Paired Remotes or Devices from the Talon
The Talon was designed so that all paired devices can be cleared from memory.
1
a. Retract the anchor on the Talon by pressing the Up
button.
b. Turn the power to the Talon "off".
2
NOTICE:
another person.
c. While holding in the Up
Panel, restore power to the Talon. You will hear a long
steady tone.
d. After the steady tone stops, release the Up
button. A series of fast beeps will be heard.
e. The Talon memory is now clear of all previously
paired devices.
2 | minnkotamotors.com
icon next the
This may require assistance from
button on the Indicator
Android
icon
Android
1a
Up Button
Down Button
Power Cable
Positive Lead
iOS
iOS
Indicator
Panel
Deployment
Notifi cation
Alarm Wire
Negative Lead
Fuse
Assembly
©2018 Johnson Outdoors Marine Electronics, Inc.