Samsung DW80R9950 Serie Manuel D'installation page 7

Not provided
Power cable Twist on wire Strain relief Electrical tape &
connector Standard duct tape
Hot water supply 90° Fitting ( / ") Tube fittings Hose clamp
3
4
line
Air gap Rubber connector
NOTE
For the hot water supply line – We strongly recommend using / " minimum O.D. copper
3
8
tubing with a compression fitting or a flexible stainless steel braided hot water supply
line.
[Warning: Do not use plastic tubing. Plastic tubing can deteriorate over time and cause a
leak inside the tube fitting.]
You also need a 90° Fitting with / " N.P.T. external pipe threads on one end and a fitting
3
4
sized to fit your hot water supply line (copper tubing/compression fitting or braided hose)
on the other.
For the power cable, we recommend a jacketed 12-2 cable with ground. Note that some
local codes may require the cable to have a BX style metal jacket.
English 7
DW9900R_DD68-00208B-00_EN.indd 7 12/29/2018 1:57:40 PM