Table des Matières
Publicité
STEP 5
1.
Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2.
Attach magnet (D) to top board (1) by inserting 2 magnet screws through holes on magnet (D),
then tighten to top board (1).
3.
Attach 2 adjustable anchor brackets (P) to top board (1) by inserting 2 screws (Q) through holes
on adjustable anchor brackets (P), then tighten to top board (1).
STEP 6
1.
Attach top board (1) to upper left side panel (2) and upper right side panel (3) by inserting 4
cam bolts (A) into cam lock holes on upper left side panel (2) and upper right side panel (3).
2.
Insert 4 cam locks (B) into cam lock holes on upper left side panel (2) and upper right side
panel (3), then rotate clockwise to secure cam bolts (A) in place.
Q
P
A
A
1
2
Q
P
D
1
B
B
3
B
B
A
A
Publicité
Table des Matières
