Table des Matières
Publicité
STEP 7
A A
8
1.
Screw in 4 cam bolts (A) into cam bolt holes on middle connection board (8).
2.
Insert 4 wood dowels (C) into wood dowel holes on middle connection board (8).
3.
Attach middle connection board (8) to upper left side panel (2) and upper right side panel (3) by
inserting wood dowels (C) into dowel holes on upper left side panel (2) and upper right side
panel (3).
4.
Insert 4 screws (K) through the holes on middle connection board (8), then tighten to upper left
side panel (2) and upper right side panel (3).
STEP 8
R
U
R
1.
Insert 4 wood dowels (C) into wood dowel holes on middle cross bars (12).
2.
Insert 4 nuts (S) into the holes on middle cross bars (12).
3.
Attach 2 middle cross bars (12) to lower left side panel (13) by inserting wood dowels (C) into
wood dowel holes on lower left side panel (13) and 2 machine screws (R) through holes on
lower left side panel (13), then tighten to 2 nuts (S) using Allen wrench (U).
4.
Attach lower cross bar (15) to lower left side panel (13) by inserting 2 screws (T) through holes
on lower left side panel (13), then tighten to lower cross bar (15).
5.
Attach lower right side panel (14) to 2 middle cross bars (12) and lower cross bar (15) by
inserting wood dowels (C) into wood dowel holes on lower right side panel (14) and 2 machine
screws (R) through holes on lower right side panel (14), then tighten to 2 nuts (S) using Allen
wrench (U).
6.
Insert 2 screws (T) through holes on lower right side panel (14), then tighten to lower cross
bar (15).
A A
12
C
S
C
13
T
T
C
2
C
C
C
R
S
12
15
C
C
3
8
K
K
R
14
T
K
K
T
Publicité
Table des Matières
