Table des Matières
Publicité
STEP 3
B
C
4
1.
Insert 2 wood dowels (C) into wood dowel holes on left support board (4).
2.
Attach left support board (4) to upper left side panel (2) by inserting cam bolts into cam bolt
holes and wood dowels into wood dowel holes on upper left side panel (2).
3.
Insert 3 cam locks (B) into cam lock holes on upper left side panel (2), then rotate clockwise to
secure cam bolts in place.
4.
Repeat above steps to assemble right support board (5) to upper right side panel (3).
5.
Screw 4 cam bolts (A) into cam bolt holes on upper left side panel (2) and upper right side
panel (3).
STEP 4
2
1.
Attach shelf (7) to upper left side panel (2) by inserting 2 cam bolts (A) into cam lock holes
on shelf (7), then insert 2 cam locks (B) into cam lock holes on shelf (7) and rotate clockwise
to secure cam bolts (A) in place.
2.
Attach upper right side panel (3) to shelf (7) by inserting cam bolts (A) into cam lock holes
on shelf (7).
3.
Insert 2 cam locks (B) into cam lock holes on shelf (7) and rotate clockwise to secure cam
bolts (A) in place.
A
A
B
B
2
C
B
3
3
7
B
B
5
C
B
A
C
A
B
B
B
Publicité
Table des Matières
