Supply Of Detergent; Hose Connection - Nilfisk FOOD Nommo Mode D'emploi

Max. allowed temperature
of supplied water:
Max. allowed pressure
of supplied water:
Water consumption
at rinsing mode:
For an optimum functioning of the
injector system, and to avoid impur-
ties in the water, we recommend
installing the enclosed filter

6.7. Supply of Detergent

Satellite
Attach chemical suction hoses:
- Washing product on the right side
- Disinfection product on the left side
see below drawing.
• Place the bag/can with detergent in
the product holder
• Check the suction filter for impurities.
• Put the suction hose into the bag/can
below product level and avoid suction
55°C
of air. See drawing no 110003498
6 bar
10,5 l/min
• After pre-rinsing, check again that
the hose is sufficiently below product
level and avoid suction of air during
foam or spray operation.
• After use of and when changing
product as well as after use of the
unit, remove the hose from the bag/
can and rinse the product inlet line
and injector with clean water.

6.8. Hose Connection

• The special hose fitted with spray
gun/outlet valve is connected to
the outlet quick coupling of the unit
(layout drawing).
• Maximum hose length: 15 m.
• It is recommended only to use Nilfisk-
FOOD hoses, which have been
tested for resistance.
If the drain hose is disconnected for a
long time, the water connection has to be
closed.
110003498
15