Firmware Upgrade - Blueant V1 Mode D'emploi

LED Indicator Chart
Power ON
Power OFF
Pairing Mode
Reset
Charging
Pairing your headset with multiple Bluetooth devices
The V1 can be paired with 8 devices. If you want to connect to a previously paired phone, use that phones Bluetooth Menu
to connect.
1. Make sure the last phone used has Bluetooth switched off or is out of range.
2. Follow the procedure in 'Pairing Procedure' above for each device you want to pair.

Firmware upgrade

The BlueAnt V1 is fi rmware upgradeable via the USB port and provided USB cable.
Please see the support section at www.blueantwireless.com for information and downloads of available upgrades.
All manuals and user guides at all-guides.com
Solid Blue for 5 Seconds
Red fl ash 3 times
Blue fl ashing
Blue fl ashing
Solid Red
Charging with Power ON Solid Red with a Purple Flash
Charging Complete Red indicator OFF
Low Battery All LED's change to Red
Idle Blue fl ash every 8 seconds
Standby 2 Blue fl ashes every 5 seconds
Ongoing call NO LED's
BlueAn
1