GE Profile P7CEBBS6RBB Mode D'emploi page 17

Care and Cleaning
Descaling Process
DO NOT use any cleaning agents not provided with the product or recommended in this manual.
NOTE:
the quality of descaling process. Run descale again.
NOTE: During descaling the machine will dispense continuously as well as pulse dispense for
a better cleaning.
It is recommended to descale once a month or more depending on the water hardness.
Water hardness strip can be used to measure your water hardness and adjust the
frequency of the descale alert accordingly under SmartHQ app.
STAGE 1:
1.
2. Add one pack of cleaning solution in the water tank and mix well.
4. Press and hold the Hot Water and Steam
Hot Water for Espresso only Machines for 3 seconds to initiate the descaling process. A
5. Water starts dispensing into the container. During this step, the machine will dispense
continually as well as pulse.
STAGE 2:
2. Repeat steps 3 to 5 from Stage 1.
NOTE: As an alternative, a 1:1 ratio of water and white vinegar can be used as a cleaning solution
for the descaling process.
System Emptying
storing the machine for long periods.
Press and hold the Hot Water and Power buttons together for 3 seconds the initiate the
emptying process. Water will empty into the drip tray.
When the cycle ends, the Rinsing
Checking Your Water Hardness
results, please refer to the SmartHQ app to set your water hardness level.
17
My Brew and