Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.3. M
ACHINE COMPONENTS
1.
Torch
2.
Torch support
3.
Handle
4.
Ground cable socket
5.
Clean&Brill Kit / Marking Kit socket
6.
Power cable
7.
Power switch
8.
Reservoir Tank
9.
Compressed air connector
10.
Operating knob
11.
Power knob
1.4. M
OBILIZATION AND STORAGE OF THE MACHINE
Transport
The machine can be manually moved with a rigid handle (3), located on its upper part. Refer to the data concerning the
dimensions and weight of the machine (Paragraph 1.2). While moving the machine, do not shake or do not turn it over, to
avoid spills of any fluid remaining in the tank.
Pay attention:
in case of need to send the Machine to N
necessary to empty completely the electrolytic solution in the tank, turning upside down the
machine.
N
ITTY
movement or transport.
Storage
The machine must be kept in a dry and safe place, mainly to avoid damage of its electrical components.
Before storing the machine for a longer period, empty out the electrolyte tank completely.
1.5. E
QUIPMENT
Nr. 1 CLINOX POWER machine
Nr. 1 use and maintenance manual
Nr. 1 torch support (2) complete with bowl (22)
Nr. 1 pad mounting tool (21)
Nr. 1 ground cable (19)
Nr. 1 Tungsten standard insert (16a)
Nr. 1 POWER BRUSH (51)
Nr. 1 cup (20)
Nr. 1 Allen key of 5mm
Nr. 1 Allen key of 2,5mm
Nr. 1 Clean&Brill Kit (Chapter 5)
CLINOX POWER
(P
A)
ICTURE
-G
is not liable for damage or injury due to fluid spills from the tank during
RITTY
12.
Electrolyte warning led
13.
Pump knob
14.
Technical data
15.
Hexagonal screws
16.
Tungsten standard insert
17.
Blowing terminal
18
Torch buttons: ON/OFF
19.
Ground cable
20.
Cup
21.
Pad mounting tool
22.
Bowl
'
Assistance Center for a reparation, it's
-G
ITTY
RITTY
S
32
Publicité
Table des Matières
