Assembling The Blower - Ego Power+ LBX6000 Manuel D'utilisation

ASSEMBLING THE BLOWER

TUBE
1. Align the groove in the tube with
the knob on the blower housing.
Push the tube onto the blower
housing until the latch snaps into
place (Fig. 2).
2. To remove the tube, press and
hold the tube-release button to
disengage the latch, then pull
the tube straight out from the
blower (Fig. 3).
16
56V LITHIUM-ION CORDLESS BLOWER — LBX6000
2
Groove
3
Knob
2
1