Upgrading Software - Samsung HT-E4530 Mode D'emploi

Settings
4 · Select a device, and then press the E
button. The AllShare Settings pop-up
appears.
5 · Select Allow, Deny, or Delete from List, and
then press the E button.
The AllShare Settings screen only displays devices
if you have established networked connections
to AllShare devices. For more information about
AllShare networked devices, see pages 34~35.

Upgrading Software

The Software Update menu allows you to
upgrade the product's software for performance
improvements or additional services.
• Never turn the product off or back on manually during
the update process.
1 · In the Home menu, select the Settings, and
then press the E button.
2 · Select Support, and then press the E
button.
3 · Select Software Update, and then press the
E button.
4 · Select one of the following methods:
• Online
• By USB
• By Disc
• By downloaded
• Standby Mode Upgrade
5 · Press the E button.
Directions for each method begin below.
| NOTE |
\ The upgrade is complete when the product turns off, and
then turns on again by itself.
\ Samsung Electronics takes no legal responsibility for product
malfunction caused by an unstable Internet connection or
consumer negligence during a Software Update.
\ If you want to cancel the upgrade while the upgrade
software is downloading, press the E button.
32
|
English
HT-E4530_ZC_ENG_0316.indd 32 HT-E4530_ZC_ENG_0316.indd 32
All manuals and user guides at all-guides.com
Online
Your product must be connected to the Internet to
use the Online function.
1 · Select Online, and then press the E button.
2 · If there is a download available, the Download
3 · When the download is complete, the
4 · If you select Update now, the product
5 · If you do not make a selection in one minute
6 · If you select Don't update, the product
By USB
1 · Visit www.samsung.com.
2 · Click SUPPORT on the top right of the page.
3 · Enter the product's model number into the
4 · Click Get downloads in the center of the
5 · Click Firmware in the center of the page.
6 · Click the ZIP icon in the File column on the
7 · Click OK in the pop-up that appears to
8 · Unzip the zip archive to your computer. You
9 · Copy the folder to a USB flash drive.
10 · Make sure no disc is inserted in the product,
The Connecting to Server message appears.
pop-up appears with a progress bar and the
download starts.
Upgrade Query window appears with three
choices: Update now, Update later or
Don't update.
upgrades the software, turns off, and then
turns on automatically.
or select Update later, the product stores
the new upgrade software. You can upgrade
the software later using the By downloaded
function.
cancels the upgrade.
search field, and then click Find Product.
page below the Downloads header.
right side of the page.
download and save the firmware file to your
PC.
should have a single folder with the same
name as the zip file.
and then insert the USB flash drive into the
USB port of the product.
2012-03-16 오후 5:23:20 2012-03-16 오후 5:23:20