Bluetooth - RuarkAudio R5 Guide De L'utilisateur

Bluetooth

Your R5 supports aptX for CD quality streaming and aptX HD
for 24-bit hi-res streaming. It will automatically connect to
your bluetooth device using the highest quality connection
supported by your device.
Pairing your Bluetooth device
When you have changed the source to Bluetooth, wait until
Awaiting connection... is shown and the indicator light on top
flashes.
Use the Bluetooth setup on your smart device to pair and
connect it to your R5. It will appear in the list of paired devices
as Ruark R5*. When connected, BT Connected + your device
name (eg Ozzie's phone) is displayed.
It may take a few seconds for your R5 to appear in the list on
your device, and in some cases you may need to input "0000"
as the pairing password.
If you do not connect within a few minutes, your R5 will stop
attempting to connect and show No connection. To connect,
select MENU > Connect device.
Connecting your Bluetooth device
As soon as you switch to Bluetooth, your R5 will display
Connecting as it attempts to connect to the last device it was
paired with.
If that device isn't available, it displays Awaiting connection...
To connect to your R5, ensure the Bluetooth function on your
device is on and select Ruark R5* from the paired devices list
on your Bluetooth device.
EN-20
Friendly name
*Your R5 will shown up as Ruark R5 on Bluetooth devices,
however, you can change this to something more descriptive
like "Ozzie's R5" or "Living room R5". See 'System settings'.
Play audio
Once connected, audio from your Bluetooth device will play
through your R5. For more information on playing audio from
your Bluetooth device, refer to your device's documentation.
NOTE: you may need to select your Ruark R5 or Bluetooth as
your audio output on your device.
Pause track
Press and then press again to play.
Play next/previous track
Press to skip to the next track in the folder or album, press
to skip to the start of the current track, press again to skip
to the previous track.
Adjust volume
We recommend that you adjust the volume on your Bluetooth
device so that the playback volume is about the same as other
sources. You can then use the volume control on your R5 to
adjust overall playback volume.
Now Playing information
Artist, album and track name will show if your Bluetooth
device and app support Bluetooth metadata. You can also
show the name of the connected device. Select what is shown
from MENU > Info.