System Settings; Display Brightness - RuarkAudio R5 Guide De L'utilisateur

System settings

Bass, treble and sub
MENU > System > Audio > Bass, Treble or Sub level
Adjust the bass and treble levels using the CONTROL KNOB
then press it to save the setting.
Loudness
Loudness automatically boosts the treble and bass
frequencies at lower volumes.
MENU > System > Audio > Loudness
3D sound
3D widens the stereo sound stage and creates a more
immersive and involving sound.
MENU > System > Audio > 3D
Date and time
MENU > System > Date and time
The time and date are automatically synchronised with
national time signals broadcast over DAB, network and FM
(FM time synchronisation may not always be available).
You can also set the time manually by turning auto update off
and change the time and date format.

Display brightness

MENU > System > Brightness
Independently adjust the brightness of the display when your
R5 is on and in standby.
When the brightness is set to 0 the display will automatically
switch off after a few seconds. The display will then briefly
illuminate whenever any key is pressed.
You can also adjust the standby brightness when your R5 is in
standby by pressing or
Language
MENU > System > Language
Change the menu language.
Software update
MENU > System > Software update
Your R5 is set to automatically check for software updates.
If one is available, you will be asked whether you want to
download and install it.
CAUTION: Disconnecting the power during a software update
could permanently damage your R5.
Factory reset
MENU > System > Factory reset
Resets all settings and clears presets.
Currently saved settings are marked with an asterisk ( )
.
EN
DA
DE
ES
FR
IT
NL
NO
KR
EN-13