Usb Charging - RuarkAudio R5 Guide De L'utilisateur

Save radio station preset
Press and hold PRESET until 'Save preset' is shown then
rotate the CONTROL KNOB to choose the preset number and
press the knob to save the current station. Presets are either
marked with the station name, frequency or as '[Not set]'.
Save preset
1. [Not set]
2. Planet Rock
3. [Not set]
4. BBC Radio 4
5. [Not set]
If you save a station over an existing preset, the new station
will replace it.
Recall radio station preset
Press PRESET, rotate the CONTROL KNOB to scroll through
the preset station list, then press the knob to select a station.
Recall preset
1. [Not set]
2. Planet Rock
3. [Not set]
4. BBC Radio 4
5. [Not set]
EN-12
Connect a Bluetooth device
When you change the source to Bluetooth, your R5 will
attempt to automatically connect to the last connected device.
If you have not yet paired your device or the previous device
is not available, your R5 will enter into pairing mode. See
'Bluetooth' section for more details.
Headphones
Connect your headphones to the 3.5mm stereo jack socket on
the front of your R5.
Headphone volume is adjusted independently from speaker
volume, so when headphones are plugged in the volume is
shown as Volume (HP).

USB charging

The USB socket on your R5 is rated at 5W (5V 1.0A) and will
power most smart devices and USB powered accessories.
Please note that: MENU > System > Audio means press
MENU, select System and finally select Audio