Unit Description; Description Of Use; Scope Of Delivery; Order Options - Pfannenberg DTS 6X1E Serie Mode D'emploi

GB
2

Unit description

2.1

Description of use

The Pfannenberg attachment and installation cooling units from the DTS and DTI series are designed to dissipate
heat from switch cabinets. Sensitive components in the switch cabinet are protected. Condensate arising during the
cooling is removed by an integrated system.
 The cooling units operate with refrigerant rated for very low flammability and which is not harmful for the ozone
layer.
2.2

Scope of delivery

The shipment consists of the following contents:
• DTI/DTS cooling unit
• Cooling unit quick guide
• Accessory kit: Appropriate seal, fastening material, electrical plug connector, etc. for the specific unit type
• Special accessories, if applicable
2.3

Order options

WARNING
Spare parts from third-party manufacturers can damage the unit
 Only original parts are subject to the manufacturer's quality control.
 Only use specially harmonized manufacturer parts for safe and reliable operation.
 For Pfannenberg spare part numbers, see
There is an optional expansion with a filter adapter for various filter mats (fleece filters, fluted filters and metal
filters).
 For Pfannenberg part numbers for accessory orders, see Ordering of
WARNING
Danger due to impermissible use of units
Inappropriate use of the units can cause severe accidents.
 Cooling units must only be used in stationary operation.
The DTI/DTS cooling units are only approved for stationary operation. As cooling units with protection rating IP 54,
the cooling units are essentially dust-protected. Limitation: Dust can penetrate after continuous exposure. The
cooling unit are resistant to spray water, but not a constant water jet.
Operating Manual DTS and DTI 6X1E Premium Controller X-Series (XC) 086100104d © Pfannenberg GmbH
Spare part orders.
accessory parts.
Page 6 / 41