Cleaning And Maintenance; Safety Instructions - Casselin CFP1 Mode D'emploi

it needs the finishing touch by hand. The rollers turn off automatically at the end of the
time previously set. To stop press the switch on the side in the 0 position.
- Settings:

Thickness
To meet all requirements, the machine provides multiple thickness of dough. Simply
turn the dial after unlocked by pulling the black handle. For a thinner rotate in the direction
of clockwise and counterclockwise to obtain a thick paste. To avoid breaking the dough
make only one pass. It is important to give a different value to the upper and lower rollers.

Shape
To obtain the right shape of the dis, it is necessary to readjust the scale to the
alteration of the weight of the dough to modify the position of the vertical perfectly to
horizontal before entering the lowest rollers

Balance:
This setting allows you to vary the speed rotation of the dough. By unscrewing the
screw you can change the position of the counterweight and sensitivity by adjusting in
one of the three holes in the balance:
- Maximum Sensitivity for low weight, the counterweight is positioned in the innermost
hole.
- Medium sensitivity: for medium weight, counterweight is positioned in the centre
hole.
- Minimum Sensitivity for other weights, the counterweight is positioned in the
outermost hole.
After adjusting again lock the screw.
ADVICE !
Make sure that the scale is in the highest position when not in use.

6. Cleaning and maintenance

6.1 Safety instructions

- Before servicing (clean, maintenance, repair) unplug the appliance
- Caustic detergents, sodium bicarbonate are forbidden for the cleaning of your
appliance.
- Check regularly the power cord.
- Never dip your appliance in liquid.
WARNING !
Not direct washing with water jets. (Neither jet under pressure)
Version 270114
.
21