Use Vehicle 3-Point Belt+Lsofix Attachment; Use Vehicle 3-Point Belt Only; Positioning Of The Child - Be Cool VENUS Mode D'emploi

EN 1. USE VEHICLE 3-POINT BELT+LSOFIX
ATTACHMENT
Installation
When installing the seat in the front vehicle seat
make sure the backrest of the vehicle seat is in an
upright position.
Position the seat inside the vehicle. Squeeze and pull
the ISOFIX
release buttons to release the ISOFIX attachments.
(fig.2) The ISOFIX attachments lock only in the
position where it is totally extended.
Click the ISOFIX attachments to the ISOFIX anchorage
points in the vehicle seat (fig.3). Make sure that all
ISOFIX indicators are GREEN, (fig.4) Push the seat as
far as possible towards the backrest of the vehicle
seat.
28
Slide the shoulder belt in the shoulder belt guide,
(fig.5) Make sure the belt is not twisted.

2. USE VEHICLE 3-POINT BELT ONLY

If the seat cannot be used in combination with ISOFIX
anchorage points in the vehicle seat, the ISOFIX atta-
chments can be stowed inside the seat and the seat
can be used in combination with the 3-point belt only.
Position the seat inside the vehicle. Slide the shoulder
belt in the shoulder belt guide, (fig.5) Make sure the
belt is not twisted.

3. POSITIONING OF THE CHILD

Adjust the headrest to the correct height by
squeezing the Height adjuster, (fig.6) The headrest
must be adjusted that there is a space one finger
wide between the headrest and your child's shoul-
ders.(fig.7)