Parts Of The Hub Base; Parts Of The Mettro Child Car Seat; Installation Of The Hub Base - APRAMO METTRO Mode D'emploi

sales channel. The manufacturer does not guarantee the quality of
second-hand products.
Before installing this child car seat, always refer to the vehicle
manufacturer's instruction manual
Always keep this manual for future reference.
1.3 Parts of the Hub Base (Fig.7)
ISOFIX Connectors
1
ISOFIX Extension Button
2
Rotation Plate
3
Seat Release Strap
4
Rotation Lever
5
Support Leg
6
1.4 Parts of the Mettro Child Car Seat ( Fig.17)
12 Headrest
13 Headrest Adjustment Handle
14 Chest Pads
15
Harness Strap
16 Harness Buckle
2

INSTALLATION OF THE HUB BASE

1) For easy installation of the base, we recommend inserting the plastic
guides on the ISOFIX anchor points of the vehicle (Fig. 1).
2) Rotate the support leg (6) of the base to the maximum angle (Fig. 2).
3) Once you've pressed the ISOFIX extension button (2), the ISOFIX
connectors (1) will pop out and be ready to fix the base to the
vehicle seat (Fig. 2).
4) Insert the ISOFIX connectors of the base to the vehicle ISOFIX
anchors and then push lightly until you hear two "clicks". The ISOFIX
connection Indicator (10) should turn from red to green (Fig 3).
7 Support Leg Adjustment Button
8 Anti-Rebound System
9 ISOFIX Release Button (9A 9B)
10
ISOFIX Connection Indicator
11 Locking Guides
21 Rotation Indicator
17 Quick Adjuster
18 Newborn Insert (40-87 cm)
19 Reclining Lever
20
Adjustment Strap
GB 05 FR 05