Important Information; Approval; General Safety Information - APRAMO METTRO Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
1

IMPORTANT INFORMATION

WARNING! THE INSTALLATION OF THIS CHILD SEAT IS ONLY
POSSIBLE USING THE HUB BASE. NEVER TRY TO INSTALL THE
SEAT WITHOUT ITS BASE OR IN A WAY DIFFERENT FROM THAT
DESCRIBED IN THIS INSTRUCTION MANUAL.

1.1 Approval

This product is suitable to transport children between 40 and 105 cm
/ ≤18 kg. The Mettro Child Car Seat can be used in both rearward-
facing mode (40 – 105 cm / ≤18 kg ) and forward-facing mode
(76 – 105 cm / ≤18 kg ).
This is an i-Size Enhanced Child Restraint System. lt is approved
according to Regulation No.129, for use in i-Size compatible vehicle
seating positions as indicated by vehicle manufacturers in the vehicle
users' manual.
If in doubt, consult either the Enhanced Child Restraint System
manufacturer or the retailer.
Manufacturer: Apramo Child Care Manufacturing Co., Ltd.,
IMPORTANT: DO NOT USE FORWARD FACING BEFORE THE
CHILD'S AGE EXCEEDS 15 MONTHS. READ THE INSTRUCTIONS
CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.

1.2 General safety information

ATTENTION!
Please carefully follow the instructions in this manual. Failure to follow
the instructions properly may affect the safety of your child. The
manufacturer is not responsible for the incorrect use of this product.
The Mettro Child Car Seat has been approved for use in both
forward-facing and rearward-facing positions. DO NOT USE this car
seat in the reverse position in the front seat of the vehicle IF THE
FRONT AIRBAG IS ACTIVATED.
68 Zhuangxi Road, Ningbo 315029, China
GB 03
FR 03

Publicité

Table des Matières
loading

Table des Matières