Power Supply Interrupted During Printing - Hiti P525L Mode D'emploi

◎ Power Supply Interrupted During Printing

In the course of printing, in case of unexpected power interruption, please must always
repower on the printer to reset. Leaving this situation for a long time, the shape of
Platen can be warped. In order to avoid this situation, please follow the instruction
below.
1. Switch off the power of the printer
2. Always await 3 or more seconds for power on and off.
3. Paper jam is displayed on the LCD of the operation panel, open the front cover and
take the necessary actions according to the "Paper Jam" topics instructs.
7.4
Stick the broken part of ribbon with a tape.
7.5
Turn the ribbon on the rewinding side and rewind
the tapped section completely and tightly.
24