CLAS OP 0521 Guide Rapide page 5

OP 0521
PNEUMATIC GREASE GUN 450ml
WARNING
• The maximum values presented in the characteristics of this product must not be exceeded.
• This gun must only be used for the purpose for which it was designed and in accordance with
the instructions in this manual.
• Do not leave the work area accessible to children or passers-by. The latter may be susceptible
to distractions that may cause errors and/or accidents.
• Inspect the tool carefully to identify any damage and lost or missing parts. If the tools are
damaged, do not use them and contact the CLAS service department for evaluation and/or
repair by mail sav@clas.com or by phone +33(0)4 79 72 69 18 or go directly to our website
clas.com.
• This pneumatic grease gun must be primed after each filling or after each change of grease
cartridge. The primer must be checked before each use.
• For best results and to extend the life of this gun, add a few drops of air tool oil through the
air fitting on the bottom of the handle. Replace the gun if it starts to operate more slowly or
incorrectly.