Operating Instructions; Standalone Mode (Sound-Active); Master/Slave Mode (Master Sound); Dmx Mode - Chauvet DJ Derby X Manuel D'utilisation

4. O
PERATING

Standalone Mode (Sound-Active):

This mode allows a single product to run to the beat of the music, or the product will auto
change in Auto Mode.
1) Set all dipswitches position to the Off position.
Mode
Sound Active
2) The product will react to the low frequencies of music via the internal microphone in
Sound-Active mode.
3) Use the audio sensitivity knob on the back of the product to make the product more or
less sensitive in Sound-Active mode. Turning the knob counterclockwise decreases
the sensitivity; turning the knob clockwise increases the sensitivity.

Master/Slave Mode (Master Sound):

This mode will allow you to link up to 32 products together without a controller.
1) Use standard DMX cables to daisy chain your products together via the DMX
connector on the rear of the products. For longer cable runs we suggest a terminator
at the last product.
2) Choose a product to function as the Master. Turn dipswitches to the Master position
on the product. The product must be the first product in line. Then simply chain the
products together using DMX cable.
Mode
Master Sound
3) Turn switch to the Slave position on the slave products, and they will react the same
as the Master.
Mode
Slave

DMX Mode

If you are unfamiliar with DMX, download the DMX Primer from the
www.chauvetlighting.com
1) Set the dipswitches to DMX mode.
Mode
DMX
2) Connect a DMX controller to the product.
3) Set the start address according to standard binary code.
Derby X™ User Manual
I
NSTRUCTIONS
Dipswitches
10 = Off
Dipswitches
10 = Off
Dipswitches
1 = On, 10 = On
website.
Dipswitches
10 = On
11