Telephone Operation - AEG Style 15 Guide Rapide

8

TELEPHONE OPERATION

8.1 Ringer volume
The ringer high / low switch located at the back of the base unit, allows you to adjust the volume of
the ringer.
High volume
Low volume
8.2 To make a call
Lift the handset or press the speakerphone button
>Check for dial tone.
Dial the telephone number.
>The display shows the duration of the call in minutes and seconds.
OR Using pre-dialling:
Dial the telephone number.
>If you make a mistake you can correct it by using the delete button
adding the right ones.
Lift the handset or press the speakerphone button
8.3 To answer a call
When the phone rings, lift the handset or press the speakerphone button
>The display shows the duration of the call in minutes and seconds.
8.4 To adjust the speakerphone volume
During a call, adjust the volume of the speakerphone to your comfortable volume level using the
volume buttons
>The display shows the volume level from 1 to 6 in the lower left corner of the LCD screen.
8.5 To end a call
>Replace the handset on the base or press the speakerphone button
8.6 To switch between the handset and the speakerphone
During a phone conversation through the handset press the speakerphone button
hands-free.
>The Speakerphone icon on the display will turn on, but conversation remains through the handset
until the handset is replaced on the base unit. While in speakerphone mode, lift the handset to
enable a private conversation.
8.7 To mute the mouthpiece or microphone
During a call, you can mute the microphone or the mouthpiece so that the person on the other end
cannot hear you.
Press the mute button
>While the microphone is muted, "MUTE" will flash in the lower right corner of the display, and the
mute icon will also flash.
Press the mute button
located on the top of the base unit.
.
again to get back to the call.
on the base unit.
to delete digits and then
on the base unit to dial out the number.
on the base unit.
7
on the base unit.
to speak