Cequent Performance Products 24929 Instructions D'installation page 4

1. Remove (3) plastic rivets that fasten the fascia tabs to the vehicle. Note: remove the center
of the rivet with a flat screwdriver. Keep (2) for re-installation.
3. Remove the center fascia tab (see Figure 2) using a utility knife or a suitable cutting tool.
©2015 Cequent™ Performance Products, Inc. - Printed in Mexico
2. Locate a tab at the bottom center of the trunk pan, bend down and out of the way.
4. Raise hitch into position passenger side first. Slide hitch over the fascia tab and over the
top of the exhaust being careful not to scratch the fascia.
Sheet 4 of 15 24929NP 03-26-15 Rev. B