Sauder Executive Desk 412902 Instructions De Montage page 35

Step 28
Pull the DRAWER FRONT BRACKETS (6G and 9G) apart and slide them
å
into the grooves in the DRAWER SIDES (D34, D35, D36, and D37).
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and "LH" for
å
easy identifi cation.
Fasten the SMALL RIGHT DRAWER FRONT (FF) to the SMALL
å
DRAWER FRONT BRACKETS (6G). Use two BLACK 9/16" LARGE
HEAD SCREWS (1S).
Fasten the DRAWER BOX FRONT (Z) to the DRAWER
å
FRONT BRACKETS (9G). Use four BLACK 9/16"
LARGE HEAD SCREWS (1S).
Fasten the RIGHT DRAWER FRONT (AA) to the
å
DRAWER BOX FRONT (Z). Use four BLACK 1-1/8"
PAN HEAD SCREWS (9S).
Repeat this step for the other drawers using
å
the LEFT DRAWER FRONTS (BB and GG).
FF
www.sauder.com/services
D35
D34
AA
BLACK 9/16" LARGE HEAD SCREW
Push down
D34
6G
D37
Z
BLACK 1-1/8" PAN HEAD SCREW
(8 used for the DRAWER FRONTS)
These edges
should be even.
412902
1S
(12 used for the BRACKETS)
Push down
9G
D36
D36
9S
Page 35