O2 Tank Hoop - Firefly Medical IVEA 600S Mode D'emploi

O2 TANK HOOP

The O2 tank hoop will hold a standard E-sized (M-24) tank of oxygen. To use, grasp the
neck of the hoop with one hand and depress the blue lever. Rotate the hoop back and up
until it "clicks" into its in-use position.
Carefully slide the O2 tank through the hoop and position the bottom of the tank inside
the cup below the hoop (see Photos 33 & 34).
CAUTION
Do not bang the O2 tank on the O2 hoop when lowering the tank into position. Do not
stand on, push down on, or place any heavy object on the deployed O2 hoop.
CAUTION
Use caution to avoid possible pinching injury. Use caution when folding and unfolding
the O2 tank hoop to avoid pinching against the main column or portions of the accessory
bracket.
To return the O2 tank hoop to its non-use position, remove the O2 tank, depress the blue
lever on the neck of hoop and gently lower it down against main column until it "clicks"
into its fully closed position.
22 IVEA® 600S
Photo 33 Photo 34