Installation And Connection - Sentiotec VITAE 350 Instructions Pour L'installation Et L'utilisation

Instructions for installation and use

5. Installation and connection

WARNING!
Danger of electric shock
● Only perform installation and connection work on the infrared radiator
when the power supply has been disconnected.
● The radiator is delivered with a plug already installed. The plug-in connector
may also be installed by the user.
● If the radiator connection is integrated into a control unit, remove the plug.
The clamp connection may only be installed by a qualified electrician or
similarly qualified person.
● The rear of the radiator must NOT be covered to ensure that the heat gener-
ated can escape through the openings.
● The ventilation slots at the top and bottom must NOT be covered (see Fig. 1)
● To ensure that the thermal fuse functions correctly, the terminal box for the
radiator must be at the top when the radiator is installed vertically (e.g. back
radiator) (see Fig. 14).
● Maintain the minimum safety distances to easily flammable materials
(see 5.1. Safety distances on page 10).
Fig. 1:
Do not cover
ventilation slots
Fig. 2: Terminal box position
p. 9/16
EN