Milwaukee MS 305 DB Notice Originale page 16

Masquer les pouces Voir aussi pour MS 305 DB:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
TECHNICAL DATA
Rated input .................................................................................................
Amps ..........................................................................................................
No-load speed ............................................................................................
Saw blade dia. x hole dia............................................................................
Saw blade thickness ...................................................................................
Cutting capacities
horizontal / vertical
90°
90° .......................................................................................
45°
90° .......................................................................................
90°
45°
.................................................................................
90°
45°
.................................................................................
45°
45°
.................................................................................
45°
45°
.................................................................................
Max. height at 90°/ 90° ...............................................................................
Max. height at 45°/ 90° ...............................................................................
Weight ........................................................................................................
Typical weighted acceleration in the hand-arm area ..................................
Typical A-weighted sound levels:
Sound pressure level ( K = 3 dB(A)) ........................................................
Sound power level (K = 3 dB(A)) .............................................................
Measured values determined according to EN 61 029.
WARNING! Read all safety warnings and all instructions,
including those given in the accompanying brochure. Failure to
follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Wear ear protectors. Exposure to noise can cause hearing loss.
Appliances used at many different locations including open air must
be connected via a current surge preventing switch.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron.
Always disconnect the plug from the socket before carrying out any
work on the machine.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Sawdust and splinters must not be removed while the machine is
running.
Never reach into the danger area of the plane when it is running.
Before use check machine, cable, and plug for any damages or
material fatigue. Repairs should only be carried out by authorised
Service Agents.
Always use the protective shields on the machine.
Do not clamp the protective swing guard.
Do not use saw blades which are damaged or deformed
Replace the table insert when worn
Do not use saw blades not corresponding to the key data given in
these instructions for use.
The protective cover should only open when the machine is lowered
to the workpiece.
Do not use saw blades made of high-speed steel.
Any faults with the machine, including any related to the safeguard or
the saw blades, must be reported to the persons in charge of safety
as soon as the faults are discovered.
It is necessary to select a saw blade which is suitable for the material
being cut.
Never use the mitre saw to cut materials other than those specified in
the instruction manual.
The handle lock must always be engaged when transporting the mitre
saw.
Only use the saw with guards in good working order and properly
maintained, and in position.
Keep the floor area free of loose material e.g. chips and cut-offs.
Only use saw blades which have been properly sharpened. It is
essential to adhere to the maximum speed specified on the saw
blade.
30
ENGLISH
220-240 V
110 V
................. 1800 W .................. 1800 W
....................... 8 A .................... 15,5 A
................. 3200 min
-1
.............. 3200 min
-1
........... 305 x 30 mm ......... 305 x 30 mm
.................... 2,4 mm .................. 2,4 mm
.......... 102 / 342 mm ........ 102 / 342 mm
.......... 102 / 241 mm ........ 102 / 241 mm
............ 57 / 342 mm .......... 57 / 342 mm
............ 45 / 342 mm .......... 45 / 342 mm
............ 57 / 241 mm .......... 57 / 241 mm
............ 45 / 235 mm .......... 45 / 235 mm
............ 166 / 53 mm .......... 166 / 53 mm
............ 166 / 10 mm
.................. 29,5 kg .................. 29,5 kg
................. < 2,5 m/s
2
.............. < 2,5 m/s
2
..................... 95 dB (A) ............... 95 dB (A)
................... 108 dB (A) ............. 108 dB (A)
Do not use any flanges other than those supplied or indicated in the
instruction manual to secure the saw blade.
Refrain from removing any cut-offs or other parts of the workpiece
from the cutting area whilst the machine is running and the saw head
is not in the rest position.
Ensure that the machine is always stable and secure (e.g. fixed to a
bench)
Long workpieces must be adequately supported.
Do not use cracked or distorted saw blades.
Before using the tool please read the instructions. If possible have
the tool demonstrated.
The dust produced when using this tool may be harmful to health.
Use a dust absorption system and wear a suitable dust protection
mask. Remove deposited dust thoroughly, e.g. with a vacuum
cleaner.
Stock having a round or irregular cross section (such as firewood)
must not be cut, as it can not be securely held during cutting. When
sawing thin stock layed on edge, a suitable auxilary fence must be
used for firm support.
SPECIFIED CONDITIONS OF USE
The mitre saw can be used for sawing solid wood, bonded wood,
glued veneer, materials similar to wood, aluminium profiles, Non-
ferrous metals and plastics.
Do not use this product in any other way as stated for normal use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in
conformity with the following standards or standardized documents.
EN 61029, EN 61029-1, EN 61029-2-9, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3 in accordance with the regulations
98/37/EC, 2004/108/EC
Winnenden, 2008-07-18
Rainer Kumpf
Manager Product Development
MAINS CONNECTION
Connect only to single-phase a.c. current and only to the system
voltage indicated on the rating plate. It is also possible to connect to
sockets without an earthing contact as the design conforms to safety
class II.
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times.
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state
the Article No. as well as the machine type printed on the label and
order the drawing at your local service agents or directly at:
Milwaukee Electric Tool, Max-Eyth-Straße 10, D-71364 Winnenden,
Germany.
SYMBOLS
Please read the instructions carefully before starting the
machine.
Always disconnect the plug from the socket before
carrying out any work on the machine.
Wear ear protectors!
Always wear goggles when using the machine.
Always keep hands away from the path of the saw
blade.
Never expose tool to rain.
Danger
Do not dispose of electric tools together with household
waste material! In observance of European Directive
2002/96/EC on waste electrical and electronic
equipment and its implementation in accordance with
national law, electric tools that have reached the end of
their life must be collected separately and returned to
an environmentally compatible recycling facility.
ENGLISH
31

Publicité

Table des Matières
loading

Table des Matières