CLAS OH 7014 Mode D'emploi page 16

OH 7014
EXTRA FLAT TROLLEY JACK 3T 75mm
OPERATING INSTRUCTIONS
IMPORTANT: Sometimes during shipment and handling, air gets into the hydraulic system, causing
poor lifting performance. Before initial operation, purge any air from the system by fully opening
pump release valve (turn handle counter-clockwise). Then, while holding the saddle down, pump
handle rapidly several times.
1
Discharge the screw
2
3 Assembly the two handle
4 Put the handle into the handle socket
Close the release valve by turning it
5
clockwise until it is firmly closed.
Up and down the handle to lifting the
6
jack
t
7
t