Grote 79100 Guide D'installation page 5

WIRELESS PROGRAMMING (OPTIONAL)
Optionally, instead of using the wires to program this light, it can be done using most Android or Apple based phones or tablets that have a flash. See the
app store for a list of approved devices.
1. Download the application from the play store.
2. Select the desired options in the app.
3. Power up the light using two or more Enable lines and attach the GREEN wire to Ground.
4. Hold the android device's flash as close as possible to the sensor in the light (shown below).
5. Press Send and the Android/Apple device's flash will flash for approximately 6 seconds.
6. If the programming was successful, the light will blink for about 1.5 seconds. If it does not blink, there is an error:
Ensure the flash of the phone is as close as possible to the location shown.

Try blocking bright sunlight from the light.

Try closing open apps on your device and or resetting it.

If you have any questions concerning this product, please contact our Customer Solution's Group. In the US: 1-800-628-0809 and in Canada: 1-800-268-5612
If a product is to be returned for any reason, please contact our Customer Solutions Group at the numbers listed above to obtain and Return Goods Authorization number
(RGA) before shipping the product back. The RGA must be clearly marked on the outside of the box/carton to ensure prompt and accurate service.
United States: 2600 Lanier Drive ● Madison, Indiana 47250 ● Phone: 800-628-0809 / 812-273-1296 ● Fax: 812-265-8440
Canada: 230 Travail Road ● Markham, Ontario L3S 3J1 ● Phone: 800-268-5612 / 905-209-9744 ● Fax: 800-267-9024
Sensor
Note white marking arrows
White Visible
-5-