SW-Stahl S3231 Mode D'emploi page 8

S 3 2 3 1
S A F E T Y I N S T R U C T I O N S
1.
Only use sockets which are suitable for impact screwdrivers.
2.
The pneumatic tool should only be used for loosening / tightening screws. Damage resulting
from non-observance of these instructions, improper use or manipulation of the tool is exclu-
ded from warranty claims. We reserve the right to make technical changes.
3.
Those operating the pneumatic tools are not allowed to wear loose clothing and must have long
hair tied back. - ACCIDENT HAZARD
4.
Always wear ear protection, safety gloves and goggles.
5.
Check hose connections for a firm fit. Do not use any damaged pressure hoses.
Damage caused by non-observance of these operation instructions or by improper repairs
is not covered by our guarantee. We reserve the right to make changes in the interest of
technical progress.
8