Tools Required - MTD 490-241-0032 Instructions De Montage

Tools Required:

3/8, " 9/16" and 1/2" box wrenches (not included);
Allen wrench (included).
CAUTION: WEARING SAFETY GLASSES IS RECOMMENDED DURING ASSEMBLY.
Assistance from another person is recommended for certain steps.
Refer to parts identifi cation sheet to ensure you have all necessary parts.
Assembly Instructions:
1. Lay sets of bars A & B on a fl at surface. Slide A & B
all the way together. Insert set screw (S) into
the end of bar B, securing fi nger-tight. Repeat with
other set of bars A & B.
NOTE: Do not tighten set screw (S) using Allen wrench until
entire frame is assembled.
2. Attach bar J to the B end of the A/B assemblies (See
arrows). Insert set screws (S) into bar J, securing in
fi nger-tight.
3. Insert poles F, narrow end up, into the union of
bars J, A/B.
3/8"
A
B
A
B
A
1/2" 9/16"
S
B
S
Narrow end up
Notice orientation of bar B
Set Screw (S)
S
J
B
A
F
F
J
A
B
S
3