Operating Conditions; Technical Data - Intenso WPD10000 Notice D'utilisation

Please do not use water or chemical solutions to clean the device. Please use only a dry cloth for
this purpose.
Do not try to repair the device yourself. The guarantee expires in this case.
Do not use the device when it shows visible damage or has become moist.
The device develops warmth when in use, this is normal. Do not cover the device when this is
in use.

OPERATING CONDITIONS

Operate the device at 0 to 35 degrees Celsius and a maximum humidity of 85% (for a short time).
If you do not use your device for a longer period, store it at between -10 and 45 degrees Celsius
at max. 90 % relative humidity (for a short time) and charge this every three months to maintain
full capacity.

TECHNICAL DATA

Dimensions:
Power consumption (Input):
Charging current delivery (Output):
Qi Version:
Frequency band:
Max. rediated power:
Internal battery:
Status display:
Integrated overcharge protection / discharge
protection / overvoltage protection / short
circuit fuse:
WARNING! Hot surface!
Holding the device for longer periods when in use can result in the
surface becoming hot, causing skin injuries.
When using the device, avoid holding it for too long, especially in areas
which become very hot. Do not carry the device directly on your body.
The device can be touched for longer periods after it has cooled down.
EN - Page 6 of 8
157 x 77,5 x 13,8 mm
5V - 3A
Power Delivery: 5V - 3A, 9V - 2A, 12V - 1.5A
USB-A: 5V - 3A shared (each 2.4 max.)
USB-A QC: 9V -2A, 12V -1.5A
USB-C: 5V - 3A max.
USB-C QC/PD: 9V - 2A, 12V -1.5A
1.2.4
125.8 - 129.49 kHz
10 watt
10000 mAh / 3.7 V lithium polymer battery
4 LED lights
Yes