Publicité
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push thirty HIDDEN CAMS (1F) into the ENDS (A and B),
å
UPRIGHTS (C and D), TOP (F), BOTTOM (G), and SHELF (H).
Then, insert the metal end of a CAM DOWEL (2F) into each
HIDDEN CAM except for the long edges of the ENDS (A
and B) and TOP (F).
2F
(16 used)
Do not insert CAM
DOWELS into these edges.
A
Arrow
1F
www.sauder.com/services
Do not tighten the HIDDEN CAMS in this step.
Arrow
1F
Arrow
1F
(30 used)
C
B
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
G
D
Arrow
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
419119
Do not insert CAM
DOWELS into this part.
F
H
Arrow
Hole
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Page 5
Publicité
