Programming The Actuator - GIESSE RACK MAX 650 Manuel D'utilisation Et D'installation

Masquer les pouces Voir aussi pour RACK MAX 650:

Table des Matières

Les langues disponibles

Connection of a TUBE-LOCK electric

lock with RACKMAX 650 24Vdc

CAUTION: After every limit stop intervention or electronic protection, the rack moves

in the opposite direction for about 1-2 mm. This is normal; it is needed to release the

mechanical parts and to give the right compression to the seals ensuring that the

mechanical parts last longer.

12. PROGRAMMING THE ACTUATOR

After having made all electrical connections and before putting the actuator into operation, it

is necessary to perform the functional parameters learning procedure; this operation is

defined as R

ESET

The actuator has been tested individually in the factory, its operation is guaranteed and it is

already programmed to make the maximum opening stroke. During the first installation or

during R

, or if the actuator has lost its basic settings, the internal memory recognizes

ESET

and stores - fully automatically - the installation and operating parameters including the

distance between sash and frame.

The position difference between the projecting part of the window and the frame is called the

"step" (see § 12.3) and, in the learning phase, it enables the actuator to acquire the limit stop

parameter when closing. It occurs the first time the actuator completely closes the window

or following a R

ESET

On the left side of the gearmotor there is a screw cap that must be removed to access the

dip-switch. At its side there is also the indicator led that is used to define the errors and

addresses of the various machines.

Programming is user-friendly, immediate and possible at any time.

• With dip-switch ON the actuator is operating, the parameters are implemented and the

stroke is stored.

• With dip-switch OFF (1) the actuator performs the R

implementing the operating and end of stroke parameters.

operation and remains stored as an operating parameter.

Connection of a TUBE-LOCK electric

lock with RACKMAX 650 24Vdc in

synchronized version

ESET

or first installation procedure

Table des Matières