Honeywell Home 50022893-001 Notice D'installation page 3

Mount Cover Plate to a Vertical 2 in. X 4 in. Electrical Box (See Fig. 3)
1. Pull the wires through the wire hole on the cover plate and wall plate. Position the cover plate and wall
plate on the electrical box with the arrows pointing up.
2. Insert two #6-32 X 1/2 pan head screws and tighten.
Fig. 3. Mount cover plate, wall plate and thermostat to a vertical 2 in. X 4 in. electrical box.
ELECTRICAL BOX
WIRE
50022893-001 COVER PLATE ASSEMBLY
COVER PLATE
MOUNTING HOLES (2)
WIRE HOLE
WALL PLATE
3
# 6-32 X 1/2 FLAT
THERMOSTAT
HEAD SCREWS (2)
M27008A
69-2064EFS—03