Honeywell Home FocusPRO 5000 Serie Information Produit

Digital
Thermostat
Product
Information
Thermostat controls
Function buttons
Press to select the functuion
displayed just above each
button. (Functions change
depending on the task.)
Auto changeover (heat/cool)
Auto Changeover is a feature used in climates where both air
conditioning and heating are used on the same day. When the
system is set to Auto, the thermostat automatically selects
heating or cooling depending on the indoor temperature.
Heat and cool settings must be at least 3 degrees apart. The
thermostat will automatically adjust settings to maintain this
3-degree separation (called "deadband").
The 3-degree separation between heating and cooling set
temperatures is fixed, and
cannot be changed.
1. Press system button until
screen displays "Auto".
The Auto system setting
NOTE:
may not appear, depending
on how your thermostat was
installed
Built-in compressor protection
Damage can occur if the
compressor is restarted
too soon after shutdown.
This feature forces the
compressor to wait for a few
minutes before restarting.
During the wait time,
the display will flash the
message Cool On (or Heat
On if you have a heat pump).
When the safe wait time has
elapsed, the message stops
flashing and the compressor
turns on.
Battery holder
Temperature buttons
Press to set preferred
temperature.
M29405
Digital display
Fan System
Auto Auto
Inside
75
75
Cool On
Fan System
Auto
Message flashes until safe
restart time has elapsed.
FocusPRO
5000
Display screen
Low battery
warning
Current inside
temperature
Press the FAN
button to select:
Auto: Fan runs
only when
heating or
cooling system
is on.
On: Fan runs
continuously.
Function buttons
Press the button
beneath each function
to view or change
settings (functions
change depending on
the task)
MCR29409
Product Manuals
Search online for Resideo 69-2698EFS for the Installation
Guide.
Cool
Search online for Resideo 69-1923EFS for the User Guide.
Setting
Cool
M29410
®
Series
Auxiliary heat (Only
for heat pumps with
auxiliary heat)
Replace
Inside
Battery
72
72
Auxiliary
Heat On
Fan System
Auto Heat
Press the SYSTEM button to select:
Heat: Heating system control.
Cool: Cooling system control.
Off: All systems off.
Auto: Thermostat automatically
selects heating or cooling depending
on the indoor temperature.
Em Heat: Emergency & Auxiliary Heat
control. Compressor is locked out.
(Select models only.)
Temperature
setting
System
Heat
Status
Setting
Cool On:
Cooling
system is
on.
Heat On:
Heating
system is
on.
MCR29406
33-00299EFS-03