Select Unit Of Measure; Auto Switch-Off Function; Precautionary Measures - Scale House OCSF Série Manuel D'utilisation

V. SELECT UNIT OF MEASURE
1) Press the [Menu/Hold] key for about 3 seconds:
2) Press the [M+] key until of the display show "U - xx";
3) Press the [Set/Div] key for set:
- kg ("U - kg");
- Lb ("U - Lb").
4) Press the [Menu/Hold] key for save and exit.
NOTE: It will possible see the selection unit of measure on the right of the LCD display.
VI. AUTO SWITCH-OFF FUNCTION
1) Press the [Menu/Hold] key for about 3 seconds:
2) Press the [M+] key until of the display show "Off xx"
3) Press the [Set/Div] key for set:
- "Off- 0" for disable the function
- "Off- x": x can be 1,5,10,30 minutes of unused time of the instrument.
4) Press the [Menu/Hold] key for save and exit.
VII. PRECAUTIONARY MEASURES
Do not allow the scale body to receive knocks. If not in use, keep the scale in a dry and ventilated place, away from heat
sources.
If the scale is in the open and there is lightning, turn off the scale temporarily.
In order to ensure the safety of the scale structure, do not rotate the crane scale with the suspended loads.
Do not overload the scale, so that the load cell is not damaged.
It is forbidden to halt or transit under the suspended load.
5