Hoover H-PURIFIER 300 Notice D'utilisation page 9

MAINTAINING YOUR H-PURIFIER
IMPORTANT: ALWAYS UNPLUG YOUR APPLIANCE FROM THE POWER SUPPLY WHEN PERFORMING MAINTENANCE TASKS.
FILTER CLEANING / REPLACEMENT
Your H-Purifier will monitor the condition of your filter. FILTER CLEANING button or FILTER REPLACEMENT button will turn yellow indicating
action is required to clean or change the filter.
Cleaning / Replacing the Filter: [Fig. 14]
• Remove the Air Inlet Cover from your product. [Fig. 14a]
• Unlock the Filter release switch. [Fig. 14b]
Remove the filter from your product. [Fig. 14c]
•
• Use a Vacuum Cleaner to clean the external mesh on the Filter Assembly OR Replace with a NEW filter. [Fig. 14d]
Re-Fit the Filter assembly into the product. [Fig. 14e]
•
• Lock the filter release switch. [Fig. 14f]
• Refit the Air Inlet Cover to your product. [Fig. 14g]
Plug in your appliance to the power supply and switch on. [Fig. 2,3]
•
• Press and hold the FILTER CLEANING button or FILTER REPLACEMENT button for 3 secs, an audible alert will be heard to indicate a
successful reset, and the button will be off. [Fig. 12,13]
Fig. 14
STORAGE OF YOUR H-PURIFIER
1. Switch off the Air Purifier and unplug the socket.
2. Clean all internal & external surfaces of the Air Purifier and the external mesh of the Filter.
3. Ensure all components are dry.
4. Remove the Air Inlet Cover [Fig. 15a] and tidy up the power cord [Fig. 15b], hang the cord on to the Cord Hook [Fig. 15c], and fit the cord
into the storage hook and fit the plug into the transport location [Fig. 15d]. Refit the air inlet cover. [Fig. 15e]
5. Store the Air Purifier in a cool dry place.
Fig. 15
GB
9 9 9