Hoover H-PURIFIER 300 Notice D'utilisation page 8

GB
8
SLEEP MODE [Fig. 8]:
Press the SLEEP mode button to activate air purifying at the lowest silent power setting. The SLEEP
mode button will be dimly lit and all other display lights will be off. This can be modified by pressing the
LIGHT CONTROL button.
POLLEN ALLERGY MODE [Fig. 9]:
The Pollen Allergy mode can only be activated via the hOn APP. You will first be required to activate
and register a profile in the app, in order to create your Pollen Allergy Profile.
Fig. 8
The Pollen Allergy mode works only when AUTO MODE is selected. [Fig. 9c]
In Pollen Allergy mode, the appliance continuously receives real time data from the App about the
monitored pollen concentration outdoor, and works automatically to maximize pollen capturing
performance.
Once pollens are captured, they are inactivated to help alleviate allergic symptoms.
When Pollen Allergy mode is activated in the App, there are 2 possible notification lamps on the product
display:
c
- The Pollen Allergy Lamp is WHITE [Fig. 9a]: The appliance and the App are monitoring the presence
of pollens outdoor and there is no risk.
- The Pollen Allergy Lamp turns YELLOW [Fig. 9b] and the Pollen Allergy Circle lamp is WHITE
a
b
[Fig. 9a]: The appliance and the APP have detected risk.
If the product is manually put into SLEEP mode or MAX mode whilst Pollen Allergy mode is activated,
Fig. 9
the Pollen Allergy mode will stop.
LIGHT CONTROL Function [Fig. 10]:
There are 3 settings available for the display lighting, On, Dim & Off.
To adjust the brightness of the display lighting simply press the LIGHT CONTROL button on the display
to cycle through the 3 available options. ON is the default setting.
If OFF is selected, any other button will need to be pressed twice to activate, after one press, the lights
will become DIM, on second press the action will be activated.
Fig. 10
CHILD LOCK Function [Fig. 11]:
Press and hold the CHILD LOCK button for 3 seconds to activate, an audible sound will be heard when
it has been activated and the CHILD LOCK button will remain illuminated. No other buttons will work
when activated.
To exit, simply press and hold the CHILD LOCK button for 3 seconds, an audible sound will be heard
confirm it is off and the button will no longer be illuminated.
Fig. 11
FILTER CLEANING ALERT Function [Fig. 12]:
Your H-Purifier monitors the condition of your filter. When the FILTER CLEANING button turns yellow,
you need to clean the outer layer of the filter. You can use a vacuum cleaner to clean the outer layer of
the filter. See 'Maintaining your H-Purifier' section.
After cleaning the outer layer of the filter, press and hold the FILTER CLEANING button for 3 seconds to
reset the alert.
Fig. 12
FILTER REPLACEMENT ALERT Function [Fig. 13]:
Your H-Purifier monitors the usage of your products and its filter. When the FILTER CLEANING buttonn
turns yellow, you need to replace the filter. See 'Maintaining your H-Purifier' section.
After replacing the filter, press and hold the FILTER REPLACEMENT button for 3 seconds to reset the
alert.
Fig. 13