Hoover H-PURIFIER 300 Notice D'utilisation page 6

GB
Multi Sensor Monitoring System
Thanks to the Multi Sensor Monitoring System your product will continuously monitor the indoor air condition in terms of PM10, PM2.5, Volatile
Organic Compounds (GAS), and Carbon Monoxide concentration (CO).
Each time you switch your product on, the Multi Sensor Monitoring system will start analyzing the indoor air and the Air Quality LED Ring will
illuminate with different colors representing real time air quality conditions.
Air Quality LED Ring
Colour
GREEN
YELLOW
ORANGE
RED
Carbon Monoxide Concentration Monitoring and Alarm
The H-Purifier will constantly monitor the indoor air for Carbon Monoxide (CO). The product is equipped with an
alert system.
When the Carbon Monoxide alarm is activated, the AIR Quality LED Ring, Infomation & CO Alert button will flash red simultaniously and an
audible alarm will sound. The alarm will remain in operation until the Carbon Monoxide (CO) concentration has reduced to below 50 ppm unless
silenced manually by pressing the CO Alert button for 3 seconds.
This CO Alert LED shows the working condition of the CO sensor. It appears in green color when the CO sensor is in normal condition, in yellow
color when the sensor is malfunctioning or exceeds its working life.
You can test if the alarm is working properly by pressing the CO Alert Button for 3 seconds, and a loud buzzer sound will last for 5 seconds if the
alarm works properly.
PREPARING YOUR H-PURIFIER
1. Filter Assembly [Fig. 1]
Before using your H-Purifier product you will need to remove the filter from it's protective packaging:
Remove the Air Inlet Cover from your product, grip the two Air inlet cover handles and pull from the product. [Fig. 1a]
•
Remove the plug from the transport location and release the cord from the Storage Hook. [Fig. 1b,c]
•
Unlock the Filter release switch. [Fig. 1d]
•
• Remove the filter from your product and remove the outer packaging. [Fig. 1e,f]
• Refit the filter into your product. [Fig. 1g]
• Lock the filter release switch. [Fig. 1h]
• Refit the Air Inlet Cover to your product. [Fig. 1i]
Fig. 1
6 6
Indoor Air Quality
EXCELLENT
SATISFACTORY
POOR
VERY POOR