Breville Smart Waffle BWM620XL Livret D'instructions page 13

CARE & CLEANING Of yOUR BREvILLE PROdUCT
Before cleaning, ensure the POWER | MENU
dial is set to the OFF position and then remove
the power plug from the power outlet.
Allow your waffle maker to cool a bit before
cleaning. The waffle maker is easier to clean
when slightly warm.
Always clean your waffle maker after each use
to prevent a buildup of baked-on foods. Wipe
cooking plates and overflow moat with a soft
cloth to remove food residue.
CAUTION
DO NOT IMMERSE ANY PART OF THE
BREVILLE WAFFLE MAKER IN WATER
OR ANY OTHER LIQUID.
PfOA-fREE NON-STICK COATING
Cooking on a non-stick surface minimizes the
need for oil, food does not stick and cleaning
is easier. Any discoloration that may occur
will only detract from the appearance of the
waffle maker and will not affect the cooking
performance. When cleaning the non-stick
coating, do not use metal (or other abrasive)
scourers. Wash with warm soapy water.
Remove stubborn residue with a non abrasive
plastic scouring pad or nylon washing brush.
NOTE
The cooking plates, hinges and overflow
moat are coated with a non-stick surface,
do not use abrasives.
NOTE
Do not use spray-on nonstick coatings
as this will affect the performance of the
non-stick surface on the cooking plates.
12
STORAGE
To store your waffle maker:
1. Ensure the POWER | MENU dial is set to
the OFF position and then unplug power
cord from the power outlet.
2. Allow the waffle maker to fully cool.
3. Set the top plate storage clip into the
locked position.
4. Wrap the power cord in the cord wrap area
below the waffle maker.
5. Store on a flat, dry level surface.
NOTE
The storage clip should not be used to
clamp down the top plate when batter is
in the cooking plates.