NewAge Products Pro 3.0 Serie Guide D'installation page 27

Mounting the Fan onto Lockers (Optional)
Add a rubber grommet, provided in
2
the hardware box, around the
opening.
Place the fan assembly from
4
underneath the Locker and hold as
shown.
Tighten the nuts on the bolts from
6
outside of the Locker. Repeat step 5
and step 6 for remaining bolts.
Attach the Filter and Fan guard onto
3
the Fan Assembly as per supplier's
instructions. Remove Locker shelves.
From underneath, insert the bolt
into the diagonal mounting holes of
5
Fan Assembly.
Route the wire upto to the power
7
source through grommet. Follow
similer steps and install second fan.
Wire
TOP VIEW
27