Important Safety Instructions - Honeywell TURBO FORCE HYF500 Serie Manuel D'instructions

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE
USING THIS FAN
WARNING – READ AND SAVE THESE OPERATING
AND SAFETY INSTRUCTIONS BEFORE USING
THIS FAN. IF YOU DO NOT UNDERSTAND THESE
INSTRUCTIONS OR PRODUCT LABELS PLEASE
CALL OUR CONSUMER RELATIONS
REPRESENTATIVES AT 1-800-477-0457 FOR
ASSISTANCE BEFORE USING THIS PRODUCT.
When using electrical appliances, basic
precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons,
including the following:
1. Use this fan only as described in this manual.
Other use not recommended as it may cause
fire, electric shock, or injury to persons.
2. This product is intended for household
use ONLY and not for commercial, industrial
or outdoor use.
3. To protect against electric shock, DO NOT
place fan in window, DO NOT immerse unit,
plug, or cord in water, and DO NOT spray
unit with liquids.
4.
This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit only
one way in a polarized outlet. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature.
5.
Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan OFF and unplug the fan from
the outlet when not in use, when moving the
fan from one location to another, and before
cleaning.
7. To disconnect the fan, first turn the unit OFF,
grip the plug and pull it from the wall outlet.
NEVER pull the plug by the cord.
8. DO NOT operate the fan in the presence
of explosive and/or flammable fumes.
9. DO NOT place the fan or any parts near an
open flame, cooking, or other heating appliance.
10. DO NOT use any product with a damaged
cord or plug, any product that malfunctions,
or any product that has been dropped or
damaged in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended
by the manufacturer may be hazardous.
13. Place the fan on a dry, level surface.
14. DO NOT hang or mount fan on a wall
or ceiling.
15. DO NOT operate if the fan housing
is damaged.
16. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
17. DO NOT operate any fan with a damaged
cord or plug. Discard any damaged fan, or
request a return authorization to return to
Kaz USA, Inc. for examination and/or repair.
18. DO NOT run fan cord under carpeting.
DO NOT cover cord with throw rugs, runners,
or similar coverings. DO NOT route cord
under furniture or appliances. Arrange cord
away from traffic areas and where it will not
be a tripping hazard.
19. DO NOT use an extension cord or power
strip with this fan.
SAVE THESE
20.
INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT USE THIS FAN WITH
ANY SOLID-STATE SPEED CONTROL DEVICE,
OTHER THAN THE ONE SUPPLIED.
2