What You May Expect When Using The Appliance - Profi Care PC-IPL 3024 Mode D'emploi

• Always Start the Application on the Lowest Intensity
Level
Only increase the intensity level for the next application
by one step if you experience little or no discomfort
during or after use of the appliance while having set the
lowest intensity level. However, also note the indicated
intensity level in the table on hair colours and skin types.
• Avoiding Side Effects
- Do not use the appliance multiple times at the same
skin area during one session!
- Avoid overlapping light flashes!
- Immediately stop the usage when your skin shows
blisters or burns!
• Avoid Complications After Use
- Do not expose the skin to the sun after the applica-
tion. This also applies to tanning with artificial light
(Solarium).
The exposure to the sun involves a continuously
unprotected solar radiation for 15 minutes. And a con-
stantly unprotected solar radiation of diffuse sunlight
for more than one hour. In order to protect the treated
skin against sunlight, apply a sunscreen with a sun
protection factor that is equal or higher than SPF 30
for 2 weeks after each use of the appliance.
- Do not use the appliance within 24 hours before or
after visiting a sauna or swimming pool. The chlorine
could lead to skin irritation.
- Cover birthmarks and tattoos before starting the
application.
- Cover dark brown or black spots such as freckles,
moles or warts before starting the application.
- Never look directly into the light flash! Always wear
the supplied safety glasses when applying.
- Do not use the appliance in the region of the nipples,
anus or genitals (male or female).
- Do not use the appliance at body sites where you
might want to be hairy later.
PC-IPL3024_IM_new
- Do not use the appliance for any other than the
intended purpose.
- Always ensure that the skin contact surface is in full
contact with the skin.
- Remove the appliance from the skin if either the skin
contact surface or the skin feels hot.
What You May Expect
when Using the Appliance
Perhaps for many users it is the first experience with a
light-based hair removal appliance that has been developed
for domestic use. The appliance is easy to use and hair
removal sessions are hardly time-consuming. It is normal
that you perceive the following during a session with this
appliance:
• Light Flash
A light flash may be visible when using the appliance.
Therefore, always wear the supplied safety glasses
when applying.
• Noise of the Fan
The built-in cooling fan of the appliance makes a sound
that is similar to a hair dryer. This is normal.
• Popping Sound with Every Light Flash
It is normal that you hear a popping sound at the same
time as the light flash is triggered.
• Slight Imprint of the Light Flash Outlet Window
This is necessary and useful, and a part of the appli-
ance's safety feature to ensure the placement of the
adjacent light flashes.
• A Sense of Warmth and Tingling
During each light flash it is normal that you experience
a slight feeling of warmth and tingling. Remember that it
is important to always use a low power level for the first
hair removal sessions. There may be times when you
feel certain warmth up to one hour after the application.
91
16.06.20