HIKOKI G 23STA Mode D'emploi page 156

We declare under our sole responsibility that Disc Grinder, identified by type and specific identification code *1), is in
conformity with all relevant requirements of the UK regulations *2) and Designated standards *3). Technical file at *4) –
See below.
This declaration is applicable to the product affixed UKCA marking.
*1) G23STA C361412S, C361413M
G23SCA C361416S, C361417M
*2) S.I. 2008/1597, S.I. 2016/1091, S.I. 2012/3032
*3) EN60745-1:2009+A11:2010
EN60745-2-3:2011+A2:2013+A11:2014+A12:2014+A13:2015
EN55014-1:2006+A1:2009+A2:2011
EN55014-2:1997+A1:2001+A2:2008
EN61000-3-2:2014
EN61000-3-3:2013
Importer and authorized person to compile the technical file
*4)
Hikoki Power Tools (U.K.) Ltd.
Precedent Drive, Rooksley, Milton Keynes, MK 13, 8PJ,
United Kingdom
Head office in Japan
Koki Holdings Co., Ltd.
Shinagawa Intercity Tower A, 15-1, Konan 2-chome,
Minato-ku, Tokyo, Japan
DECLARATION OF COMFORMITY
30. 11. 2021
A. Nakagawa
Corporate Officer
111
Code No. C99742872 F
Printed in China