Your M220E; Advice And Safety - Nortel Networks M220E Guide Utilisateur

MNPS8592XAA.qxd 6/12/00 10:25 Page 20

YOUR M220E

Advice and safety:

Warning: do not install the equipment in a damp room. This equipment must be
used at a temperature between 5°C and 45°C.
In areas which are frequently subject to storms, protect the equipment with a device
which guards against electrical overvoltage and check that your insurance covers
this type of damage.
Electrical connection: supply on 230V network, alternating monophase current
except for IT scheme installations defined in standard EN 60-950. Warning, the
network voltage is classed as excessive according to the criteria of this standard.
As a precaution, in the event of danger, the mains supply block acts as a 230V sup-
ply sectioning device. It must be installed near the equipment and easily accessible.
Telephone connection: the network voltage is TNV1 classified (Telephone Network
Voltage) in the context of standard EN 60-950.
The CE marking attests to the conformity of the products with the technical regula-
tions which apply on the date of approval in accordance with the Additional direc-
tives and requirements 73/23/CEE for user safety and 89/336/CEE for electro-
magnetic disturbance.
All manuals and user guides at all-guides.com
20
Handset pin in wall-
mouted position
Loudspeaker
Handset
Screen
Memories and call log
managing keys
Mute key
Acces to direct
memories
Programming
(Language, contrast, memories)
Acces to indirect
memories
Flashing
Last number redial
On hook dialling
key / Handsfree
Adjustment listening
level
(handset and hansfree)
In case of power
outage, the M220E will
operate partially.
You may only send calls
by picking up the handset.
The memories are stored.
PAGE 20