Cruise Control - Kick Start - Acceleration Mode - VELOCIPTOR climb 2 ES 111 OR Manuel De L'utilisateur

CRUISE CONTROL - KICK ST ART -
acceleration mode
The scooter is equipped with the cruise control function.
The function is activated automatically, maintaining a constant speed for
about 5 seconds.
Cruise control keeps the engine power constant (speed may vary depen-
ding on the slope of the terrain) even if the accelerator is not pressed. The
cruise control function is interrupted by pressing any brake lever or the
accelerator.
The Kick Start function activates or deactivates the kick-off of the scooter
by means of a small muscle push; without this push the scooter will not
start.
It is also possible to vary the type of acceleration by choosing between a
moderate or strong acceleration.
Activation / deactivation of functions:
- Some functions can be customized by end user:
- Turn on the scooter and press the "ON / OFF" and "MODE" buttons
at the same time for a few seconds, the letter "P" will appear on
the display;
Push the "MODE" key to move between the various settings (P1,
-
P2...).
-
Change ONLY the following parameters:
45