Axis P3905-RE Guide D'installation page 15

NO TICE TICE
NO NO TICE
When mounting AXIS P3905-RE, make sure to use appropriate
screws for the surface.
5. Optionally insert an microSD card. See image 4.
6. If necessary adjust focus and other camera settings.
Note
See the products User Manual for more information about camera
settings. The User Manual is available at www.axis.com
7. Remove and discard the protection tape from the glass (top
cover inside)
NO TICE TICE
NO NO TICE
Do not touch the inside of the glass after the protection tape
has been removed
8. Mount the top cover on the bottom cover.
9. Press gently the top cover against the bottom cover before
tighten the screws (6x). See image 5.
AXIS P3905–RE Network Camera
15