Kenmore 235.6152 Serie Guide D'utilisation Et D'entretien page 16

Optional Features
NOTE
Cantilever shelves are supported at
the back of the refrigerator. Cantilever
shelves are available in either glass or
wire.
To adjust cantilever shelves:
1. Lift front edge up.
2. Pull shelf out.
Replace the shelf by inserting the hooks
at rear of the shelf into the wall bracket.
Lower the shelf into the desired slots and
lock into position.
SpillProofTM glass shelves (some models)
catch and hold accidental spills. In
some models, the SpillProofTM shelves
slide out for easy access to food and
for fast cleaning. The shelves slide out
independently of the cantilever brackets.
Just pull the front of the shelf forward.
The shelf can be extended as far as the
stopper will allow, but it is not removable
from the cantilever bracket.
Full-width
Cantilever
Glass Shelf
All manuals and user guides at all-guides.com
Adjustable door bins
Some models have adjustable door bins
that can be moved to suit individual
needs.
To move door bins:
Freezer Tilt
Out Door
Rack
The Tilt-Out
Door Rack tilts
out for easy
access. Pinch
Cantilever Glass
the sides and
Shelf
pull out for easy
Fixed and Sliding
cleaning.
Crisper
Humidity
Control
(some
models)
The crisper
humidity
control,
present
16
1. Lift bin straight up.
2. Remove bin.
3. Place bin in desired position.
4. Lower bin onto supports until locked
in place.
Low
Humidity
Bin Liner
(Some
Models)
High
Humidity